Many realtors and home owners ask me about polybutylene (PB) piping. These are two scary words sure to put a frown on any real estate agent’s face. I come across it every few months and this is what it looks like.
According to Polybutylene.com : “Polybutylene is a form of plastic resin that was used extensively in the manufacture of water supply piping from 1978 until 1995. Due to the low cost of the material and ease of installation, polybutylene piping systems were viewed as “the pipe of the future” and were used as a substitute for traditional copper piping. While scientific evidence is scarce, it is believed that oxidants in the public water supplies, such as chlorine, react with the polybutylene piping and acetal fittings causing them to scale and flake and become brittle. Micro-fractures result, and the basic structural integrity of the system is reduced. Thus, the system becomes weak and may fail without warning causing damage to the building structure and personal property. It is believed that other factors may also contribute to the failure of polybutylene systems, such as improper installation, but it is virtually impossible to detect installation problems throughout an entire system.”
I have seen real estate deals go south as soon as I announce that I found PB piping. If you suspect that you have PB piping in your home, you may want to seek counsel from a licensed plumber familiar with PB plumbing to get their expert advise with regards to the supply piping system replacement. Entire neighborhoods and municipalities have been involved with class-action suits against the manufacturers and installers of PB piping over the years with varying degrees of success.
I love things that are homemade. Some of the best gifts I ever got from my daughters were items made from their little hands. Things like a wobbly paperclip holder I keep on my desk and a “World’s Best Dad” frame with a cute photo of us. I see many homemade things in other people’s homes too. Things that make me stop and smile. But I saw something homemade at an inspection recently that made me stop and shake my head…a homemade security system! Check out the photo! I know you just laughed out loud.
I guess one good thing you can say about this security system is that it is portable. It can be moved from room to room, depending on what you want to capture. I like the fashionable stand that it comes with too! Lovely paint buckets.
I know the home seller had their reasons for (ahem) installing this security system. It just gave me and the potential buyers and their Realtor a nice chuckle.
When it comes to reading a home inspection report, home buyers usually belong to one of two camps: They either shudder at the site of the sometimes long document or curl up with a hot cup of coffee and delve into it like a good book. (Engineers usually fall into the latter group.)
Whether buyers are from camp one or camp two, they will inevitably come to rely on this extremely important resource when deciding to purchase a home, regardless of whether it’s their dream home or an investment. It is the tell-all results of having someone go where the potential homeowner has not gone before (the roof, the attic, etc.). Even for brand new homes, buyers are usually surprised when an inspector prints out a multi-page report with items that are in need of attention or repair.
For those buyers who hate the thought of reading a novel about plumbing, there is usually a “summary” report that accompanies the detailed inspection report with “just the facts, ma’am.”
“The home inspection report is an invaluable resource,” says Dale Pavlicek, associate broker at Coldwell Banker Residential Brokerage in Scottsdale, Arizona, “My buyers and I review the report with the inspector and ask lots of questions, especially on the technical findings.”
So what is typically included in an Arizona Home Inspection Report? There is an introduction, a photo of the home, the address, the buyers’ names, the inspection date and usually many, many photographs. Most importantly, it includes commentary on all the major items that are inspected (see below).
Inspection report(s) vary from inspector to inspector, depending on their software and style, but all reports generated by an Arizona-licensed Home Inspector have the same components, thanks to an Arizona state law passed in 2002 with the help of the National Association of REALTORS®.
Before our state standards, many REALTORS® complained that home inspection reporting was all over the board. “Back then, anyone could hang up a sign saying they were a home inspector,” says Pavlicek. “The law to certify home inspectors not only held their profession to a higher standard, but gave guidelines on what needed to be included within a home inspection.”
The current standards for reporting require inspectors to observe and describe various components in and around the house. You may be surprised to find out that many items and issues included within a typical home inspection are not actually required by law, but are included in the report by some inspectors. For instance, Arizona inspectors are not required to observe fences, soil conditions, irrigation systems or smoke detectors, but many go above and beyond the standards to include commentary in their report on some or all of these items.
Today, most inspectors use one of many computerized reporting systems to provide easy to read reports. Regardless of how the report looks, if it is stylized with headers and graphics, or just bare bones type, it should be able to explain in laymen’s terms the findings on all items included in the inspection.
But most important of all, if you have a question or need further clarification on an item on your inspection report, your inspector is just a phone call away.
What is typically included in an Arizona home inspection report?
Site: Grading, drainage, walkways, driveways, patios and decks
Structure: Exterior walls, trim, foundation, slab and basement/crawlspace
Attic: Insulation, ventilation and framing
Roof: Surface condition and drainage
Garage: Overhead vehicle door, automatic opener and fire separation
Laundry: Washer/dryer connections, utilities and sinks
Plumbing: Water main, supply, waste and vent piping, fuel system, water heater
Heating/Cooling: A/C and heat systems, ducting, filters and thermostat
Electrical: Service entrance, main and sub panels, wiring, outlets and switches
Interior: Floors, walls, ceiling and doors
Kitchen: Cabinets, sinks, built-in appliances
Bathrooms: Cabinets, sinks, faucets, tubs, showers, toilets and ventilation
Pool/Spa: Interior, deck, filter, piping, electric and heater